Sungrow
Series: Sungrow PowerStack Series
Three-phase integrated bess inverter all-in-one system with 458 kWh LFP battery
In the Sungrow PowerStack Series series
Ideal for installers who need a balanced 458 kWh option with 110 kW for mainstream project sizing.
Rated Output Power
110 kW
VendorUsable Capacity
458 kWh
Vendor| AC Rated Power | 110 kWVendor |
| AC Voltage | 400Vendor |
| Energy (Nominal) | 480 kWhVendor |
| Energy (Usable) | 458 kWhVendor |
| C-rate (continuous) | - |
| Peak Power | 121.00000000000001 kWVendor |
| Battery Chemistry | LFPVendor |
| DC Voltage Range | 700-1100 VVendor |
| System Round-trip Efficiency | 90 %Vendor |
| Noise | 75 dB(A)Vendor |
| EMS Included | trueVendor |
| Protocols | Modbus TCP, Modbus RTU, IEC 61850Vendor |
| EMS Functions | Peak Shaving, Demand Charge Management, Self-consumption, BackupVendor |
| Remote Maintenance | trueVendor |
| Fault Diagnosis | - |
| Grid Support Functions Detail | Freq/Volt control, LVRT, HVRT, Active/Reactive power controlVendor |
| Data Logging Interval | 1 sVendor |
| Response Time | - |
| Thermal Management | LiquidVendor |
| Fire Suppression | NFPA 68 / NFPA 69 / NFPA 855 compliant, Aerosol or gas basedVendor |
| Detectors | Smoke, heat, and gas detectorsVendor |
| Maintenance Access | Front accessVendor |
| Pressure Relief | - |
| Thermal Runaway Mitigation | Cell-to-cell thermal insulation and active coolingVendor |
| Lifting Points | Bottom forklift / Top liftingVendor |
| Service Interval | Annual inspectionVendor |
| IP Rating | IP55Vendor |
| Corrosion Rating | C4/C5Vendor |
| Operating Temp Range | -30 to 50Vendor |
| Dimensions (W x H x D) | 2300*1500*2400 mmVendor |
| Weight | 4200 kgVendor |
| Certifications | IEC 62619, IEC 62477, UN 38.3, CEVendor |
| Battery Certifications | IEC 62619Vendor |
| System Certifications | IEC 62477-1Vendor |
| LVRT/HVRT | - |
| Warranty Throughput / Cycles | Project dependentVendor |
Run a single-product scenario check using the same Product Match rules.
No compliance data available for this product.
-
Product data is sourced from manufacturers, official websites, and community contributions. Energidea does not guarantee completeness or accuracy. Installers should verify specifications, certifications, and compatibility with manufacturer documentation before quotation.
Genera template di prompt pronti per installatori su ChatGPT o Gemini.
Tipo di rete: 3P
Adatto per: Manufacturing plants and commercial buildings with variable loads.
Componenti principali
PowerStack Cabinet, Local Smart Meter, Industrial Switchgear
Note
Automatically discharges during peak periods to lower electricity bills.
Tipo di rete: 3P
Adatto per: Facilities with large solar arrays seeking energy independence.
Componenti principali
PowerStack Cabinet, Rooftop PV System, Central Controller
Note
Excess solar is stored and used during non-generation hours.
