Energidea
SolarEdge Home Battery 400V

SolarEdge

Series: SolarEdge Home Battery Series

Home Battery 400V

Single-phase off grid inverter with 9.7 kWh LFP battery

Verified

Best for

  • + Residential installations
  • + Single-phase residential installations
  • + Projects requiring long warranty coverage
  • + LFP battery applications - verify cycle life from datasheet

Not ideal for

  • ! Large-scale C&I projects - consider commercial product line
  • ! Three-phase commercial/industrial installations
  • ! Backup/battery-backup projects (no EPS functionality)

Key Specifications

Chemistry

LFP

Vendor

Usable Capacity

9.7 kWh

Vendor

Warranty

10 years

Vendor
Show All Specifications

Battery

Battery ChemistryLFPVendor
Battery Voltage ClassHVVendor
Capacity (Nominal)10 kWhVendor
Capacity (Usable)9.7 kWhVendor
Nominal Voltage400 VVendor
Voltage Range350-450 VVendor
Min Modules1Vendor
Max Modules3Vendor
Installation Type-Vendor
Capacity Scalability Min9.7 kWhVendor
Capacity Scalability Max29.1 kWhVendor
Max Charge Power5 kWVendor
Max Discharge Power5 kWVendor
Peak Discharge Power7.5 kWVendor
Cycle Life-Vendor
DoD100 %Vendor
Round-trip Efficiency94.5 %Vendor

Environment & Mechanical

IP RatingIP55Vendor
Charge Temp Range-10 to 50Vendor
Discharge Temp Range-10 to 50Vendor
Heating Supported-
Dimensions (W x H x D)790 x 1179 x 250 mmVendor
Weight121 kgVendor

EMS & Communication

BMS InterfacesRS485, Wireless (SolarEdge Home Network)Vendor
Compatible InvertersSolarEdge Home Hub Inverter, SolarEdge Home Wave Inverter (Single Phase)Vendor
BMS Update SupportedtrueVendor

Compliance & Warranty

CertificationsIEC62619, UL1973, UL9540, UN38.3Vendor
Shipping CertificationsUN38.3Vendor

Data Confidence & Verification

Verified

Data Sources

  • + Official datasheet - verified 2026-03-27
  • + Installation manual - verified 2026-03-27
  • + Certificate - verified 2026-03-27

Data gaps that may affect your decision

  • ! Outdoor temperature range not specified - confirm outdoor suitability.
  • ! IP rating not documented - confirm installation location suitability.

Quick Check: Does this product fit your project?

Run a single-product scenario check using the same Product Match rules.

Full Product Match

Compliance & Certifications

No compliance data available for this product.

Certifications

-

Documents & Downloads

DATASHEET PDF

INSTALLATION MANUAL

  • Home Battery 400V Installation ManualDownload

CERTIFICATES

Compatible Products - coming in Phase 3

Product data is sourced from manufacturers, official websites, and community contributions. Energidea does not guarantee completeness or accuracy. Installers should verify specifications, certifications, and compatibility with manufacturer documentation before quotation.

Core comparison fields are incomplete (>30% missing). Not recommended for direct comparison yet.

Installer AI Prompt

Generate installer-ready prompt templates for ChatGPT or Gemini.

Typical System Setup

Standard Single Phase Storage

Standard residential self-consumption optimization.

Grid Type: Single-phase

Suitable For: New residential systems and retrofits.

Main Components

SolarEdge Single Phase Inverter, Home Battery 400V, Inline Meter.

Notes

Requires SolarEdge Home Network plug-in.

Disclaimer: For reference only. Final system configuration should be confirmed based on local regulations, grid requirements, and project conditions.

Multi-Battery Expansion

Increased energy storage capacity for large households.

Grid Type: Single-phase

Suitable For: High energy demand scenarios.

Main Components

SolarEdge Home Hub Inverter, up to 3 Home Battery 400V units.

Notes

Batteries are connected in parallel.

Disclaimer: For reference only. Final system configuration should be confirmed based on local regulations, grid requirements, and project conditions.

Related Products